David At 02:11 PM 11/16/04, you wrote: >That I didn't know, but I don't measure the old center pin anyway since if >your repinning you've got a problem with that size. >I check a #21 in the birdseye and center. That tells what I need to >know. i.e. if tight in both I go down a size. If tight in the birdseye >but loose in the flange I've to go up to #21.5 or larger or rebush. Why not just find the pin that's tight in the birdseye and use that? I don't think I've ever had a situation where if it's tight there, it's loose in the bushing! >David I.
This PTG archive page provided courtesy of Moy Piano Service, LLC