This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Julia, The Lowell gage is for checking the down bearing, while the string level = can be used to see if there is down bearing it is not intended to take = those measurments, but to help one level the strings at the strike = point, or as close as one can with the dampers in the way. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Isaac Sadigursky=20 To: Pianotech=20 Sent: Sunday, November 28, 2004 5:06 PM Subject: RE: Lowell gage Hi,Julia! ILowell gage is pre-mother goose gage.Both work great.Isaac=20 ----- Original Message -----=20 From:=20 To: pianotech@ptg.org Sent: 11/28/04 3:35:27 PM=20 Subject: Lowell gage Greetings,=20 What is a Lowell gage? Julia Gottchall,=20 Reading, PA ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/73/08/e8/bc/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC