painting keytops?

Isaac Sadigursky irs.pianos@earthlink.net
Sun, 28 Nov 2004 16:17:01 -0800


---------------------- multipart/alternative attachment
Dear Julia! On a few pianos those cracks did happened because exessive pressure was applied when they were glued at the factory also the plastic itself was not of modern quality,yet.human soil  and dirt cat into those small cracks and only a good buffer can get them out and only temporarily.I had followed those pianos after sale and the only solution is to replace those key tops if it's worth the expence. any other thouths?i


----- Original Message ----- 
From: 
To: pianotech@ptg.org
Sent: 11/28/04 3:51:26 PM 
Subject: painting keytops?


Greetings, 

           Can you paint white keytops? If so, what should I use?  I have a spinet that I wish to sell, but I just do not think the piano is worth a keytops re-covering job. 

            I tried sanding them out with 150 grit then polish with a 320 grit sand paper. Its plastic keytops have very, very, fine cracks. Then, I closely examined some of the cracks: looking at the key under magnification from the side, (cracks are form side to side)  the cracks are all the way through the plastic, yet the plastic is not becoming unglued off the wood. 

          Said cracks are more cosmetically annoying than functionally threatening. Then again, most spinet buyers/owners want the piano for the furniture anyway (because they certainly dont seem to be interested in sound quality) ...prehaps I should just replace them anyway?


Julia Gottchall, 
Reading, PA 
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/84/67/d1/bc/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC