Lowell gage

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
No, they are worlds apart and meant for different things. The MG level =
will only give a indication to whether there is any down bearing while =
the Lowell will show how much.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: David Ilvedson=20
  To: pianotech@ptg.org=20
  Sent: Monday, November 29, 2004 3:09 PM
  Subject: Re: Lowell gage


  So Joe, are you saying you can check bearing with this and it's =
comparable to the Lowell gauge?  =20

  David I.

  ----- Original message ---------------------------------------->
  From: Joe And Penny Goss <imatunr@srvinet.com>
  To: Pianotech <pianotech@ptg.org>
  Received: Mon, 29 Nov 2004 07:09:53 -0700
  Subject: Re: Lowell gage

  #320 on other tools page
  Joe Goss RPT
  Mother Goose Tools
  imatunr@srvinet.com
  www.mothergoosetools.com
    ----- Original Message -----=20
    From: David Skolnik=20
    To: irs.pianos@earthlink.net ; Pianotech=20
    Sent: Monday, November 29, 2004 5:15 AM
    Subject: RE: Lowell gage


    I cannot find the gauge you refer to on Mother Goose web site.  Is =
there some other image or description available?

    David Skolnik


    At 04:06 PM 11/28/2004 -0800, you wrote:

      Hi,Julia! ILowell gage is pre-mother goose gage.Both work =
great.Isaac=20
      =20
      =20

        ----- Original Message -----=20

        From:=20

        To: pianotech@ptg.org

        Sent: 11/28/04 3:35:27 PM=20

        Subject: Lowell gage


        Greetings,=20


                 What is a Lowell gage?



        Julia Gottchall,=20

        Reading, PA=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8e/aa/cc/89/attachment.htm

---------------------- multipart/alternative attachment--