2004-October Archives by Thread
Starting: Fri Oct 1 00:03:11 2004
Ending: Sun Oct 31 22:40:38 2004
Messages: 1923
- Lower end, rock hard hammers
Barbara Richmond
- Advice on Lyon & Healy
Horace Greeley
- spinning wheels
David Love
- Advice on Lyon & Healy
Ron Lindquist
- Titebond III
Joe Garrett
- Evidence of Overlaquering of Hammers
Joe Garrett
- Octave Tuning
Andrew & Rebeca Anderson
- Micrometer source
Joe Garrett
- Micrometer source
Joe Garrett
- lifting strings
Jon Page
- lifting strings
Paul McCloud
- micrometers.....
Joe Garrett
- available player piano advice.
gordon stelter
- lifting strings
David Ilvedson
- Evidence of overlacquered hammers
David Ilvedson
- Evidence of overlacquered hammers
Richard Brekne
- Evidence of overlacquered hammers
Erwinspiano@aol.com
- Glue, in the field
Joe Garrett
- pscale, was micrometer.....
Joe Garrett
- Control grand volume
Paul Chick (Earthlink)
- Glue; bridge pins
pianolover 88
- Fw: Emailing: piano tools 024.jpg
Jack Houweling
- lifting strings
Jack Houweling
- off list
Erwinspiano@aol.com
- Wasn't supposed to be off list-- was hardened Hammers
Erwinspiano@aol.com
- Bound for Greece/Ric B
Joe Garrett
- cheep tules
Mark Davidson
- Scale Master
Joe Garrett
- Control grand volume
Joe Garrett
- Glue; bridge pins/Terry
Joe Garrett
- hammers & soundboards
Erwinspiano@aol.com
- Glue; bridge pins/Terry
Joe Garrett
- Beginning Tuner
Ken Kociolek
- Glue; bridge pins/Terry
Michael Spalding
- Beginning Tuner
Michael Spalding
- Scale Master Web Site
Joe Garrett
- Epoxy
Joe Garrett
- Micrometer Selection
Matthew Todd
- Impulse and response
Sarah Fox
- Epoxy/bridge pins application
Joe Garrett
- Epoxy/bridge pins application
pianolover 88
- Jinx Joe - hehe
Joe Garrett
- Micrometer Selection
Joe Garrett
- Epoxy
Joe Garrett
- Epoxy
Paul Chick (Earthlink)
- available Baldwin hammers
daniel carlton
- OT - Hurricane Jeanne - FWIW
Farrell
- Old Knabe Backaction
Farrell
- Muting
Matthew Todd
- Impulse and response
Erwinspiano@aol.com
- new grand hammer head replacement
D.L. Bullock
- Fwd: Wanted:"Tuning" by Jorgensen
Dave Doremus
- Jason Kanter
Avery Todd
- Epoxy
Michael Spalding
- Epoxy
Joe Garrett
- Knabe Back action
Joe Garrett
- Olde Knabe Back Action
Joe Garrett
- new grand hammer head replacement
Quentin Codevelle
- new grand hammer head replacement
Quentin Codevelle
- Old Knabe Backaction
A440A@aol.com
- OT Andersens Stinking Euro's
Quentin Codevelle
- rebuilding decisions
Mark Davidson
- Rebuilding Decisions
michael campi
- Re: OT André's Stinking Euro's
Quentin Codevelle
- Re: OT André's Stinking Euro's
Quentin Codevelle
- OT Andersens Stinking Euro's
antares
- OT Andersens Stinking Euro's
antares
- OT real men
Quentin Codevelle
- rebuilding decisions
Quentin Codevelle
- european corner..
Quentin Codevelle
- DC behind fallboard!
pianolover 88
- rebuilding decisions
Mark Davidson
- rebuilding decisions
Mark Davidson
- OT Andersens Stinking Euro's
Alan Forsyth
- OT Re: Cheese in general OT
Quentin Codevelle
- rebuilding decisions
Mark Davidson
- lifting strings
Joe Garrett
- DC behind fallboard!
David M. Porritt
- rebuilding decisions
David Ilvedson
- DC behind fallboard!
David Ilvedson
- Parting point was Evidence of overlacquered hammers
David Ilvedson
- Fw: Emailing: piano tools 024.jpg
David Ilvedson
- OT Real Men
Joe Garrett
- OT Andersens Stinking Euro's
Erwinspiano@aol.com
- european corner..
Erwinspiano@aol.com
- comic relief a --big OT --compliments of Ronsen hammers
Erwinspiano@aol.com
- Beer
Joe Garrett
- Epoxy type?
pianolover 88
- Kinks in wire
Joe Garrett
- Muting
Mark Dierauf
- Seiler grand?
Alpha88x@aol.com
- comic relief a --big OT --compliments of Ronsen hammers
Erwinspiano@aol.com
- Epoxy type?
Joe Garrett
- Strike Point
Joe Garrett
- rebuilding decisions....etc.
Joe Garrett
- Epoxy
Joe Garrett
- Epoxy - Clean up with Acetone
Joe Garrett
- Beer
Quentin Codevelle
- Beer
Bernhard Stopper
- Beer
Conrad Hoffsommer
- Beer
Conrad Hoffsommer
- Beer
Bernhard Stopper
- Impulse and response
BobDavis88@aol.com
- Seiler grand?
Piannaman@aol.com
- first almost-rebuild/major fixup project!
BobDavis88@aol.com
- Bechstein
BobDavis88@aol.com
- rebuilding decisions....etc.
Mark Davidson
- Beer
Quentin Codevelle
- rebuilding decisions....etc. (Modified by Kent Swafford)
Stéphane Collin
- The Tune Holder
Gordon Holley
- Genuine Steinway wippens
Barbara Richmond
- rebuilding decisions....etc.
BobDavis88@aol.com
- OT - Beer
Joe Garrett
- OT - Beer
Quentin Codevelle
- ethics question
Don
- Genuine Steinway wippens
Barbara Richmond
- SAT went bad-good thing
Richard Day
- Genuine Steinway wippens
Erwinspiano@aol.com
- OT - Beer
Quentin Codevelle
- ethics question
richard.ucci@att.net
- ethics question
Keith McGavern
- ethics question
Ian
- ethics question
richard.ucci@att.net
- OT - Beers
Joe Garrett
- Rebuilding Decisions....
Joe Garrett
- Genuine Steinway wippens
Erwinspiano@aol.com
- Genuine Steinway wippens
Erwinspiano@aol.com
- Genuine Steinway wippens
Erwinspiano@aol.com
- ethics question
David Ilvedson
- ethics question
David Ilvedson
- OT Windows XP SP2
Cy Shuster
- Drill bit size for #1 gauge tuning pins
Kurt
- Drill bit size for #1 gauge tuning pins
A440A@aol.com
- Rebuilding Decisions....
Joe Garrett
- Smart ass Euros!
Joe Garrett
- Genuine Steinway Parts
Joe Garrett
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Drill bit size for #1 gauge tuning pins
A440A@aol.com
- ethics question
David Ilvedson
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Evidence of overlacquered hammers
Erwinspiano@aol.com
- Smart ass Euros!
Quentin Codevelle
- rebuilding decisions
Mark Davidson
- ethics question
marc avery
- ethics question
richard.ucci@att.net
- ethics question
richard.ucci@att.net
- ethics question
richard.ucci@att.net
- ethics question
richard.ucci@att.net
- ethics question
richard.ucci@att.net
- ethics question
richard.ucci@att.net
- OT: Schools using Linux
Hechler Family
- Evidence of overlacquered hammers
Erwinspiano@aol.com
- ethics question
Erwinspiano@aol.com
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- rebuilding decisions - bellows
Mark Davidson
- pianotech Digest, Vol 759, Issue 3
Robin Blankenship
- Rebuilding Decisions....
Joe Garrett
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- ethics question
Alpha88x@aol.com
- Rebuilding Decisions....
Erwinspiano@aol.com
- ethics decision discussion now on steroids
D.L. Bullock
- ethics decision discussion now on steroids
Quentin Codevelle
- ethics question
David Ilvedson
- Live Chat Reminder
John Musselwhite
- Rebuilding Decisions....
Joe Garrett
- Rebuilding Decisions.....
Joe Garrett
- rebuilding decisions
Mark Davidson
- Ethics (and reasonable fees)
Alan Forsyth
- estimated pricing for work
Bec and John
- colorof felt and stringing cloth
Jurgen Goering
- Rebuilding Decisions....
Joe Garrett
- Luxury Items
Joe Garrett
- estimated pricing for work
A440A@aol.com
- Colored Felt
Joe Garrett
- bridge pins
Jurgen Goering
- Billing's flange repairs
Piannaman@aol.com
- Beer
Piannaman@aol.com
- "high profile" grand dampers
pianolover 88
- Billing's flange repairs
Piannaman@aol.com
- rebuilding decisions - bellows
Mark Davidson
- ethics question
richard.ucci@att.net
- ethics discussion to the next level
D.L. Bullock
- Billing's flange repairs
Paul McCloud
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- Bridge Pins
Joe Garrett
- Luxury Items - Jim Harvey
Joe Garrett
- Luxury Items
Joe Garrett
- August Forester
tuneit
- average tuner income
pianolover 88
- ethics discussion to the next level
David Ilvedson
- Drill bit size for #1 gauge tuning pins
Erwinspiano@aol.com
- ivory key chip repair
Chris Henke
- rebuildable
Kent Swafford
- Dampp-Chaser Power Cord Organization
Rick Bazemore
- Dampp-Chaser Power Cord Organization
Jon Page
- rebuilding decisions
Mark Davidson
- screw holders
J Patrick Draine
- -OT- belated coffee thanks to Del
Ron Koval
- average tuner income
David M. Porritt
- Pinblock with delignit cap (was something else)
Phillip Ford
- Screw Holders
Joe Garrett
- Voicing seminar in Brussels (Belgium)
Stéphane Collin
- FW: Subject: Prize Winning Worn Out Piano Keys -!!!
Paul Chick (Earthlink)
- The Genesis Jig
montbrim@usol.com
- Peace Piano
Phillip Ford
- screw holders
David Ilvedson
- Peace Piano
Conrad Hoffsommer
- 3 questions
Mike Kurta
- 3 questions
Ron Koval
- 3 questions
A440A@aol.com
- 3 questions
Phillip Ford
- Key recovering
D.L. Bullock
- 3 questions
Ian
- Glass soundboard
V T
- Essex tuning pin coils
Paul Mulik
- Glass soundboard
David Ilvedson
- Glass soundboard
Erwinspiano@aol.com
- yamah m-450
richard.ucci@att.net
- Steinway factory whippens
Erwinspiano@aol.com
- yamah m-450
David Ilvedson
- Steinway factory whippens
Erwinspiano@aol.com
- OT: FREE FlightGear is an open-source, multi-platform flight
simulator.
Hechler Family
- Steinway factory whippens
Erwinspiano@aol.com
- Steinway factory whippens
BobDavis88@aol.com
- Fwd: Whippen jack angle & Renner parts
Erwinspiano@aol.com
- yamah m-450
richard.ucci@att.net
- Whippen jack angle
Barbara Richmond
- 3 questions
J. Stanley Ryberg
- grand damper felt removal
pianolover 88
- SW/parts question
Mark Davidson
- SW/parts question
Mark Davidson
- Adios, mi amigos ...
Alan
- Renner 'Blues'
David Ilvedson
- grand damper felt removal
Joe Garrett
- grand damper felt removal
A440A@aol.com
- grand damper felt removal
Joe Garrett
- Stuart
Kent Swafford
- damp-rack & steamer (Modified by Kent Swafford)
Kent Swafford
- grand damper felt removal
David Ilvedson
- More square grand advice
Kurt
- damp-rack & steamer
pianolover 88
- damp-rack & steamer
pianolover 88
- grand damper felt removal
Joe Garrett
- Removing grand damper felt
Joe Garrett
- grand damper felt removal
MarinoPiano@aol.com
- damp-rack & steamer
Joe Garrett
- damp-rack & steamer
pianolover 88
- option to steaming...
pianolover 88
- OT new voicing tool
Nichols
- Stuart-The movie
Quentin Codevelle
- Tuning information
Paul Chick (Earthlink)
- Soundboard Installation - Clamping
Farrell
- Renner 'Blues'
David M. Porritt
- A-190 Beckstein pricing?
J Patrick Draine
- Renner 'Blues'
Erwinspiano@aol.com
- Ethics..Should be Perfume/Cologne/Aftershave
Joe Garrett
- damp-rack & steamer
Joe Garrett
- damp-rack & steamer
pianolover 88
- Looking for info re liability insurance
Robin Blankenship
- A-190 Beckstein pricing?
David Ilvedson
- Ethics..Should be Perfume/Cologne/Aftershave
David Ilvedson
- 3 questions
Alpha88x@aol.com
- tuning lower notes
Alpha88x@aol.com
- 3 Questions
Mike Kurta
- another dampp-chaser thought/question
Bec and John
- Renner 'Blues'
Erwinspiano@aol.com
- Wurzen felt
Erwinspiano@aol.com
- Wrapped strings in temperament
Greg Livingston
- Re: visual cortex and delicious foodstu
ffs
Erwinspiano@aol.com
- Perfumes, Colognes & Aftershaves
Joe Garrett
- Damp-Chaser Installation Pictures
Joe Garrett
- Wound Strings in the Temperament Octave
Joe Garrett
- tuning lower notes
Piannaman@aol.com
- Re: visual cortex and delicious foodstu
ffs
Erwinspiano@aol.com
- Soundboard Installation - Clamping
Erwinspiano@aol.com
- non-standard agraffe size
Matt
- Stuart
Richard Brekne
- Ronsen Wurzen
Erwinspiano@aol.com
- Live Chat Reminder
John Musselwhite
- yamah m-450
richard.ucci@att.net
- tilter
richard.ucci@att.net
- Yamaha M-450/Rick Ucci
Benny L. Tucker
- abel "encore" hammers
pianolover 88
- another dampp-chaser thought/question
DCrpt@comcast.net
- tuning lower notes
Alpha88x@aol.com
- Stuart
David Ilvedson
- tuning lower notes - partials explained
Mark Davidson
- Yamaha M-450/Rick Ucci
richard.ucci@att.net
- Sales Tax
Matthew Todd
- Downbearing - Setting with Loose Board
Farrell
- tool bag
David Ilvedson
- tuning "whole sound"
Ron Koval
- Replacing upright jack springs
Cy Shuster
- Books
Joe Garrett
- Sales Tax
David M. Porritt
- Sales Tax
Jon Page
- Replacing upright jack springs
David M. Porritt
- old rattle...
Conrad Hoffsommer
- Books
Joe Garrett
- Tuning whole sound
David Renaud
- Sticking keys
Timothy R Cochran
- Books
Alpha88x@aol.com
- Downbearing - Setting with Loose Board
Erwinspiano@aol.com
- Sales Tax
Alpha88x@aol.com
- Replacing upright jack springs
David M. Porritt
- Epoxy/bridge pins application
Erwinspiano@aol.com
- Epoxy/bridge pins application
Erwinspiano@aol.com
- Replacing uprigh jack springs
Joe Garrett
- Sticking keys
David Ilvedson
- tuning 'notes'
David Ilvedson
- Replacing upright jack springs
David Ilvedson
- tuning lower notes
David Ilvedson
- Epoxy/bridge pins application
Kent Swafford
- another dampp-chaser thought/question
Andrew & Rebeca Anderson
- Epoxy/bridge pins application
Erwinspiano@aol.com
- Setting Rates
Matthew Todd
- Setting Rates
David Ilvedson
- Sticking Keys
Timothy R Cochran
- Setting Rates
lgulli2586
- Setting Rates
David Ilvedson
- Setting Rates
David Ilvedson
- Sales Tax
ChicagoTuner@aol.com
- another dampp-chaser thought/question
DCrpt@comcast.net
- roslau vs mapes
pianolover 88
- roslau vs mapes
Erwinspiano@aol.com
- tuning 'notes'
Piannaman@aol.com
- Sticky note: today's puzzler
Piannaman@aol.com
- Tuning Notes
lgulli2586
- Sticky note: today's puzzler
Michael Spalding
- Sticky note: today's puzzler
David M. Porritt
- Sticky note: today's puzzler winner unveiled
Piannaman@aol.com
- Baldwin
lgulli2586
- Pearl River and Kohler & Campbell
Matthew Todd
- More Baldwin
lgulli2586
- tuning 'notes'
Alan Forsyth
- Baldwin
Alan Forsyth
- Baldwin
Ron Koval
- Another one for the Giffer
Richard Brekne
- Tuning
lgulli2586
- A different use for Flitz
Piannaman@aol.com
- Another one for the Giffer
Piannaman@aol.com
- Better late than....
lgulli2586
- m-450
richard.ucci@att.net
- Replacing front and balance rail pins
michael campi
- Replacing front and balance rail pins
Erwinspiano@aol.com
- Downbearing - Setting with Loose Board
Erwinspiano@aol.com
- Replacing front and balance rail pins
David M. Porritt
- marking tuning pin holes for drilling.
Erwinspiano@aol.com
- Piano Tone Building
Erwinspiano@aol.com
- Quality damper felt
Mike McCoy
- Pivoting hammer rest rail?
Cy Shuster
- A score-writer!
Cy Shuster
- Pivoting hammer rest rail?
David Ilvedson
- Quality damper felt
David Ilvedson
- Replacing front and balance rail pins
David Ilvedson
- A score-writer!
David Ilvedson
- A different use for Flitz
David Ilvedson
- m-450
David Ilvedson
- A score-writer!
David Ilvedson
- marking tuning pin holes for drilling.
Erwinspiano@aol.com
- Replacing front and balance rail pins
Joe Garrett
- Downbearing - Setting with a loose board
Joe Garrett
- m-450
Benny L. Tucker
- Quality damper felt
pianolover 88
- Pivoting hammer rest rail?
Quentin Codevelle
- yamaha wire is metric
pianolover 88
- m-450
richard.ucci@att.net
- m-450
richard.ucci@att.net
- m-450
richard.ucci@att.net
- young chang U-1
richard.ucci@att.net
- Downbearing - Setting with a loose board
Joe Garrett
- Drill press, 1
David Skolnik
- marking tuning pin holes for drilling.
David Ilvedson
- Extracting glued bridge pins
David Skolnik
- replacing front and balance rail pins
michael campi
- 4'10" (147 cm) Henry F. Miller scale
Mark Davidson
- Plate to pin contact, (was marking)
A440A@aol.com
- Tenor counter bearing
Jon Page
- replacing front and balance rail pins
David M. Porritt
- replacing front and balance rail pins
David Ilvedson
- yamaha wire is metric
David Ilvedson
- Quality damper felt
Erwinspiano@aol.com
- Extracting glued bridge pins
Erwinspiano@aol.com
- Plate to pin contact, (was marking)
A440A@aol.com
- yamaha wire is metric
pianolover 88
- yamaha wire is metric
pianolover 88
- Replacing Key Pins
Joe Garrett
- OT - DAMHIKT
Joe Garrett
- Extracting glued bridge pins
David Ilvedson
- OT - DAMHIKT
David Ilvedson
- first almost-rebuild/major fixup project!
BobDavis88@aol.com
- Looking for German mfr. of copper piano wire
cdwitmer@spamcop.net
- Looking for German mfr. of copper piano wire
Erwinspiano@aol.com
- Epoxy on soundboards
David Love
- dampers
Ed Carwithen
- dampers
Paul McCloud
- Tuning Notes
Alpha88x@aol.com
- Looking for German mfr. of copper piano wire
Erwinspiano@aol.com
- Bass Strings Availability
Joe Garrett
- yamaha wire is metric..OT
BobDavis88@aol.com
- dampers
Jon Page
- spoon bender
Alpha88x@aol.com
- Replacing front and balance rail pins
Alpha88x@aol.com
- yamaha wire is metric..OT
pianolover 88
- Smoother 10ths and good octaves.
Phil Bondi
- Bass Bridge
John Ross
- smoother10th but better octaves
David Renaud
- spoon bender
Erwinspiano@aol.com
- spoon bender
David Ilvedson
- yamaha wire is metric..OT
David Ilvedson
- dampers
David Ilvedson
- Special Piano
David Andersen
- The answer from Yamaha
pianolover 88
- 4'10" (147 cm) Henry F. Miller scale
Mark Davidson
- yamaha wire is metric..OT
pianolover 88
- Special Piano
Erwinspiano@aol.com
- Bass Bridge
Joe Garrett
- The answer from Yamaha
David Ilvedson
- dampers
Erwinspiano@aol.com
- The answer from Yamaha
David Ilvedson
- RPT/Associate Debate
lgulli2586
- More debate
lgulli2586
- Metric & American Wire
Avery Todd
- RPT/associate debate
David Renaud
- The answer from Yamaha
pianolover 88
- Live Chat Reminder
John Musselwhite
- String cut marker
Barbara Richmond
- searching for Tom Servinsky
Thos. Carpenter
- spoon bender
Alpha88x@aol.com
- Metric - was The answer from Yamaha
Joe Garrett
- Metric
Joe Garrett
- Metric - was The answer from Yamaha
David Ilvedson
- spoon bender
David Ilvedson
- Wood Castors
Ron Lindquist
- Metric - was The answer from Yamaha
pianolover 88
- wire wrappings
Mark Davidson
- metric
Ian
- G3 Wanted
mortier
- http://www.pianotour.com/
pianolover 88
- The answer from Yamaha
David Ilvedson
- The answer from Yamaha
pianolover 88
- Epoxy on soundboards
ANRPiano@aol.com
- (OT) Metric - was The answer from Yamaha
pianolover 88
- http://www.pianotour.com/
Quentin Codevelle
- "Viennese Grand"
Joe Garrett
- Replacing Upright Jack Springs
Joe Garrett
- News
Matthew Todd
- Metric
Joe Garrett
- Metric
Joe Garrett
- News
Quentin Codevelle
- OT - was Metric
Joe Garrett
- Back on Topic sorta - was OT Metric - was The answer....
Joe Garrett
- Repinned parts
Barbara Richmond
- OT - News
Joe Garrett
- Replacing Upright Jacks - Now - In The Field
Joe Garrett
- Epoxy on soundboards
Joe Garrett
- (OT) Metric -
pianolover 88
- (OT) Metric -
pianolover 88
- Metric
pianolover 88
- Metric
pianolover 88
- Repinned parts
Dave Davis
- (OT) Metric -
David Ilvedson
- Metric
David Ilvedson
- (OT) Metric - was The answer from Yamaha
David Ilvedson
- Epoxy on soundboards
Erwinspiano@aol.com
- Metric
David Ilvedson
- News
VOCE88@aol.com
- repinned parts
Barbara Richmond
- Epoxy on soundboards
ANRPiano@aol.com
- Viennese Grand
Joe Garrett
- Re OT- Metric
Joe Garrett
- Redneck R Us!
Joe Garrett
- Epoxy on soundboards..
Joe Garrett
- OT -Metric
Joe Garrett
- OT -Metric
David Ilvedson
- repinned parts
Erwinspiano@aol.com
- O.T ---was Metric
Erwinspiano@aol.com
- Redneck R Us!
Erwinspiano@aol.com
- Epoxy on soundboards
Erwinspiano@aol.com
- Epoxy on soundboards..
Erwinspiano@aol.com
- Epoxy on soundboards
ANRPiano@aol.com
- metric wire sizes
Piano Forte Supply
- repinned parts
Barbara Richmond
- Epoxy on soundboards
michael campi
- Redneck R Us!- -----OT
Erwinspiano@aol.com
- OT - Rednecks R Us
Joe Garrett
- Epoxy on soundboards
Joe Garrett
- Metric or Standard?(Test yourself!)
Piano Forte Supply
- Peace Offering (OTOT)
Sarah Fox
- Coppered vs. nickel bridge pins
Bob Hull
- OT Metric
Alan Forsyth
- Redneck R Us!- -----OT
David Ilvedson
- Vertical Damper Lift Rail
Farrell
- Metric or Standard?(Test yourself!)
David Ilvedson
- Vertical Damper Lift Rail
David Ilvedson
- sales tax and dealers
richard.ucci@att.net
- Metric or Standard?(Test yourself!)
Piano Forte Supply
- poxy on soundboards and seminar in Bruxelles
David Ilvedson
- (OT) Metric -
pianolover 88
- OT OT OT Metric
pianolover 88
- seminar in Bruxelles
Piannaman@aol.com
- Viennese Grand
Piano Forte Supply
- OT OT OT Metric
Piannaman@aol.com
- Vertical Damper Lift Rail
Piannaman@aol.com
- sales tax and dealers
Nichols
- Dissparaging Remark?
Joe Garrett
- research award link
David M. Porritt
- Viennese Grand
Joe Garrett
- Steinway Nose Bolt
Clark Sprague
- Tokiwa back action
Ron Nossaman
- sales tax and dealers
richard.ucci@att.net
- Re-ribbing an olde board
Joe Garrett
- OT-"Bad American"
pianolover 88
- OT-"Bad American"
Erwinspiano@aol.com
- Re-ribbing an olde board
Quentin Codevelle
- best repinning toll
richard.ucci@att.net
- How We sense : "a total and complete ear opener".
Quentin Codevelle
- OT-"Bad American"
pianolover 88
- Re-ribbing an olde board
Erwinspiano@aol.com
- Viennese Grand
Joe Garrett
- Re-ribbing an olde board
Erwinspiano@aol.com
- Re-ribbing an olde board
Erwinspiano@aol.com
- Re-ribbing an olde board
Joe Garrett
- tuning lower notes - partials explained
Alpha88x@aol.com
- tuning lower notes - partials explained
Alpha88x@aol.com
- OT-"Bad American"
David Ilvedson
- OT-"Bad American"
David Ilvedson
- How We sense : "a total and complete ear opener".
David Ilvedson
- How We sense : "a total and complete ear opener".
David Ilvedson
- Stephen Birkett in the news
Kent Swafford
- rabbit felt hammers
Erwinspiano@aol.com
- Japan Bound
Richard Brekne
- Richard's flight
Marcel Carey
- OT-"Bad American"
pianolover 88
- How We Hear
Michael Spalding
- OT-"Bad American"
David Ilvedson
- OT-"Bad American"
pianolover 88
- Aligning sostenuto tabs on a U-3 (upright)
Cy Shuster
- NC Conference
Farrell
- OT-"Bad American"
David Ilvedson
- new technique OOF
Joe And Penny Goss
- Copying damged bass bridge.
John Ross
- OT-"Bad American"
pianolover 88
- OT-"Bad American"
pianolover 88
- Aligning sostenuto tabs on a U-3
Joe Garrett
- Copying damaged bass bridge
Joe Garrett
- Model E
James Grebe
- Cost of Pianos/Stephen Birkett
Joe Garrett
- Finish Over Polyester?
mortier
- Model E
Erwinspiano@aol.com
- wound string replacement
David Renaud
- Leg Bolt and Lyre Support bolt help
Phil Bondi
- wound string replacement
Erwinspiano@aol.com
- Leg Bolt and Lyre Support bolt help
Mark Davidson
- How we hear to Jeneetah
Quentin Codevelle
- Soft blows (was How we hear)
jason kanter
- How we hear to Jeneetah
Jenneetah
- How we hear to Jeneetah
David Andersen
- How we hear to Jeneetah
ilex cameron ross
- How we hear to Jeneetah
David Andersen
- How we hear to Jeneetah
Farrell
- How we hear to Jeneetah
David Andersen
- How we hear
David Love
- over-all tuning discussions, was How we hear
ilex cameron ross
- over-all tuning discussions, was How we hear
Jenneetah
- over-all tuning discussions, was How we hear
David Love
- over-all tuning discussions, was How we hear
David Andersen
- just one rubber mute, was over-all tuning discussions, was How we
hear
jason kanter
- just one rubber mute, was over-all tuning discussions, was
How we hear
David Andersen
- just one rubber mute, was over-all tuning discussions, was How
we hear
Phil Bondi
- just one rubber mute, was over-all tuning discussions, was
How we hear
David Andersen
- just one rubber mute, was over-all tuning discussions, was How
we hear
Phil Bondi
- just one rubber mute, was over-all tuning discussions, was
How we hear
David Andersen
- Leg Bolt and Lyre Support bolt help
Allan Gilreath, RPT
- Live Chat Reminder
John Musselwhite
- Setting Pins in Temperament
Matthew Todd
- Rebuilding vs. Buying
Matthew Todd
- Soft blows (was How we hear)
Quentin Codevelle
- Rebuilding vs. Buying
Michael Spalding
- Soft blows
Joe Garrett
- Rebuilding vs. Buying
Joe Garrett
- OT-Road Service
Barbara Richmond
- Rebuilding vs. Buying
Joe Garrett
- About a Steinway D soundboard substitution
Dza7
- OT-Road Service
Michael Spalding
- How We Hear
Alpha88x@aol.com
- OT-Road Service
David M. Porritt
- OT-Road Service
David Ilvedson
- soft blows / tuning
Carl Teplitski
- Rebuilding vs. Buying
Mark Davidson
- top 10
richard.ucci@att.net
- top 10
Erwinspiano@aol.com
- Cost of pianos (was Re: Stephen Birkett in the news)
JWyatt1492@aol.com
- top 10
Nichols
- How we ... tune !
Quentin Codevelle
- How we hear to David Andersen
Quentin Codevelle
- How we hear to David Andersen OT
Quentin Codevelle
- Drive Tuning Pins?
Chris Henke
- [Fwd: soft blows / tuning]
Carl Teplitski
- Drive Tuning Pins?
Piano Forte Supply
- Steinway School
Larry Trischetta
- About a Steinway D soundboard substitution
Erwinspiano@aol.com
- top ten
lgulli2586
- Top 10
John Pasterczyk
- How we hear to Jeneetah
David Ilvedson
- top 10
richard.ucci@att.net
- Top 10
Joe Garrett
- top 10
richard.ucci@att.net
- Top 10
richard.ucci@att.net
- Cracked Lid
Paul Chick (Earthlink)
- How we hear to David Andersen OT
Erwinspiano@aol.com
- Driving Tuning Pins?
Joe Garrett
- pure politcs was: How we hear to David Andersen OT
Erwinspiano@aol.com
- top ten
pianolover 88
- top 10
pianolover 88
- Top 10
Joe Garrett
- OT - Road Service
Joe Garrett
- OT-Road Service
David Ilvedson
- Cracked Lid
VOCE88@aol.com
- (no subject)
Larry Fisher
- Cracked Lid
David M. Porritt
- Cracked Lid
David M. Porritt
- OT Political
LarryinAtlanta@aol.com
- Cracked Lid
Erwinspiano@aol.com
- OT Political
David Ilvedson
- OT-political
Barbara Richmond
- top 10
David Ilvedson
- Perfect Pitch
Joe Garrett
- Larry's Termites!
Joe Garrett
- Cracked Lid
Joe Garrett
- SAT II
jere fryett
- OT Political
Sarah Fox
- perfect pich
Piano Forte Supply
- Fwd: Re: Fwd: Re: How to play Bullshit Bingo (OT)
Conrad Hoffsommer
- OT Political - {my last word}
Erwinspiano@aol.com
- Cracked Lid
David M. Porritt
- OT Political - {my last word}
Alpha88x@aol.com
- OT-political
Alpha88x@aol.com
- OT-political
Alpha88x@aol.com
- OT Re: perfect pitch
Phillip Ford
- OT Political
LarryinAtlanta@aol.com
- Perfect Pitch
lgulli2586
- OT Politicals
pianolover 88
- Perfect Pitch
pianolover 88
- Perfect Pitch
pianolover 88
- The Richard Gertz myth
Phillip Ford
- OT Political - {my last word}
David Ilvedson
- OT Politicals
David Ilvedson
- Perfect Pitch
John Baird
- OT Political
LarryinAtlanta@aol.com
- OT Political
LarryinAtlanta@aol.com
- re. OT Political
Elwood Doss, Jr.
- Soft blows
Alpha88x@aol.com
- perfect pich
Alpha88x@aol.com
- Bridge string termination
Phillip Ford
- OT Politicals
Alpha88x@aol.com
- Soft blows
Quentin Codevelle
- OT Political
LarryinAtlanta@aol.com
- OT Political
David M. Porritt
- Bridge string termination
Phillip Ford
- OT Political & Perfect Pitch
Phillip Ford
- OT Political
David Ilvedson
- Soft blows
David Ilvedson
- OT UBL edorses Kerry!
pianolover 88
- OT Politicalz
pianolover 88
- Perfect Pitch
Joe Garrett
- OT Political - {my last word}
Joe Garrett
- OT Politicals
Erwinspiano@aol.com
- re. OT Political
Erwinspiano@aol.com
- Cracked Lid
Erwinspiano@aol.com
- re. OT Political
LarryinAtlanta@aol.com
- OT Political - {my last word}
LarryinAtlanta@aol.com
- OT Political
LarryinAtlanta@aol.com
- string rendering (was: soft blows)
Piano Forte Supply
- OT Political
Piannaman@aol.com
- OT Re: perfect pitch
Piannaman@aol.com
- Cracked Lid
David M. Porritt
- OT Political
Erwinspiano@aol.com
- OT Politicals
Erwinspiano@aol.com
- Link from carl meyer
carl meyer
- Tuning and Zen
Quentin Codevelle
- Link from carl meyer
Quentin Codevelle
- Used piano market
David Ilvedson
- Tuning and Zen
Quentin Codevelle
- OT Politicalz
David Ilvedson
- OT Political & Perfect Pitch
David Ilvedson
- humidity level for conditioning new pinblock
Bob Hull
- OT: Is this still a piano oriented list or what?
David M. Porritt
- OT: Is this still a piano oriented list or what?
Quentin Codevelle
- Dampp Chaser Price Increase
Matthew Todd
- Varnishing Pinblocks
Joe Garrett
- Pin Driving Fluid
Joe Garrett
- Ronsen Wurzen update
Erwinspiano@aol.com
- OT Politicals
Erwinspiano@aol.com
- Key-Brite
Matthew Todd
- Ronsen Wurzen update
pianolover 88
- Voicing
Joe Garrett
- Sharp Treble
Joe Garrett
- Pin Driving Fluid
Joe Garrett
- Over sharp treble
Piannaman@aol.com
- OT Still a piano list: of course it was a joke !!!
Quentin Codevelle
- Voicing
David M. Porritt
- Over sharp treble
David M. Porritt
- Key-Brite
Matthew Todd
- Over sharp treble
Quentin Codevelle
- Over sharp treble
Joe Garrett
- Voicing
David M. Porritt
- Loading
Joe Garrett
- Over sharp treble
Don
Last message date:
Sun Oct 31 22:40:38 2004
Archived on: Sun Oct 31 23:12:16 2004
This archive was generated by
Pipermail 0.08 (Mailman edition).
This PTG archive page provided courtesy of
Moy Piano Service, LLC