Palettes

Gordon Holley gwholley@hi-techhousing.com
Fri, 1 Apr 2005 14:27:38 -0500


Thanks Ed.  So, as I read this and look at a cross section of a grand, the 
palette may then
also be called the let off rail.  Yes?.
Gordon Holley

----- Original Message ----- 
From: <A440A@aol.com>
To: <pianotech@ptg.org>
Sent: Friday, April 01, 2005 12:53 PM
Subject: Re: Palettes


>
> << uestion:  What are palettes?.  I >>
>
> These are the wooden slats that are often used to mount the let-off 
> buttons
> on, then attached to the underside of the hammer rail.
> Regards,
>
>
>
> Ed Foote RPT
> http://www.uk-piano.org/edfoote/index.html
> www.uk-piano.org/edfoote/well_tempered_piano.html
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives 


This PTG archive page provided courtesy of Moy Piano Service, LLC