Enlarging existing bridge pin holes

[Conrad Hoffsommer]

At 13:19 4/28/2005, you wrote:
>Hi David, Ron,
>
>FAIW, I "inherited" a small, unusual drill bit of the type you may be
>needing.  If you could untwist a standard twist bit, so that the flutes were
>straight and parallel, that's what it would look like.  I have no idea where
>you would find such a bit, and I have no idea what it's called, but at least
>it exists somewhere.  <shrug>
>
>Peace,
>Sarah



Sounds like a reamer to me.



Conrad Hoffsommer
Decorah, IA

The Unspeakable Law:
As soon as you mention something, if it's good, it goes away.
If it's bad, it happens.
-Murphy's Law(R) Calendar