---------------------- multipart/related attachment Sorry, Stefan. He'll never sand to "bare wood" without going through the veneer, and generally making a mess out of it. DO NOT NEVER EVER ATTEMPT TO EVEN THE TONE OF VENEERED WOOD BY SANDING !!!!!!!!! You will sand through, end up with concavities, etc.. --- Stéphane Collin <collin.s@skynet.be> wrote: > Hello Terry. > > I would sand to bare wood (carefully) and restain. > (But who am I ?) > > Best wishes. > > Stéphane Collin. > ----- Original Message ----- > From: Farrell > To: Mailing list for piano refinishers. ; > pianotech@ptg.org > Sent: Sunday, August 21, 2005 6:39 PM > Subject: Stain Stripping > > > I stripped the finish off the inside of the case > (rim) of a piano I am working on. I used a > methylene-chloride-free product called Dyna-Strip 2, > sold by Pianolac. One application of stripper left > on overnight removed the finish completely - it > literally fell off - no scraping required at all. > I'm very happy with that aspect of the results. > > In some areas, hunks of the stripper slid down the > face of the rim - it still removed the finish - but > in those areas, less stain was removed. So now I > have shadows of light and dark where there was an > apparent difference in stain removal. > > What is the best way to address these stain > shadows? > > Terry Farrell > > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---------------------- multipart/related attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC