Stéphane,
I have tried that before with the unfortunate result of accidently
sanding through the veneer. Thanks for the reply but I don't think I'll be
trying that again.
Greg Newell
At 12:25 AM 2/17/2005, you wrote:
>Hello Greg.
>
>When I face that problem (wood doesn't take stain well), I don't hesitate
>to sand the pannel to bare wood (120 grit sandpaper), re smooth the
>surface (up to 800 grit) and re stain after.
>
>Regards.
>
>Stéphane Collin.
>
>
>It does not seem
>>to want to take stain or especially dye. What do I do?
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
Greg Newell
Greg's piano Forté
mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC