At 15:36 6/11/2005, you wrote: >Hello Gordon, > >I can supply the metal (actually plated brass) flanges as well as hammer >shanks for Viennese actions. As well, there are special pliers required >to regulate these actions. The center pin is pointed on both ends and >fits into the brass capsule. The tightness of the fit adjusts the center >pin friction. I have more info if needed. > >Regards, >Jurgen Goering And they have the added "advantage" of an audible low friction alarm. You folks think teflon clicks are loud? Uff da! DAMHIK... ;-} Conrad Hoffsommer You have the right to remain silent. Anything you say will be misquoted, then used against you.
This PTG archive page provided courtesy of Moy Piano Service, LLC