"From" vs "On Behalf of" in headers

[Dean May]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi Ric
 
I use Outlook also and do not have the problem you are describing.
Perhaps you are using the preview pane to look at the messages in which
case it won't work. I have to open the message in its own window. Then
at the top above the message there is the abbreviated header
information, including the first line which is:
 
From:      pianotech-bounces@ptg.org; on behalf of; Richard Moody
[remoody@midstatesd.net]
 
If I right click on the part that says "Richard Moody
[remoody@midstatesd.net]" I got several options including adding you to
my contact list and copying to the clipboard. I can then easily copy and
paste into a new message. 
 
Hope this helps.
 
Dean
Dean May             cell 812.239.3359
PianoRebuilders.com   812.235.5272
Terre Haute IN  47802
 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Richard Moody
Sent: Saturday, June 11, 2005 11:27 PM
To: 'Pianotech'
Subject: "From" vs "On Behalf of" in headers
 
List, 
          Thanks to Conrad and Terry, it looks like Outlook might be the
culprit instead of list software.  Now why my Outlook shows for example,
"On Behalf Of Avery Todd"  but won't allow you to click on or paste that
in to send an email is beyond me.  When I had Outlook Express I had no
problem.  Conrad and Terry pasted in their headers from the list and
they showed  a "from" line instead of "on behalf of" and both are using
different software than Outlook.   I called Bill to complain but they
put me on hold.  However since I am on dial up I am breaking the
connection to get back to the list to thank those who took the time to
help out.    -----ric   
 
                    "When something is gained, nothing is lost." 
         Miguel de Cervantes Saavedra (1547-1616). Spanish writer.
 
 
 
 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Avery Todd
Sent: Friday, June 10, 2005 4:27 PM
To: Pianotech
Subject: RE: WTB Book, "Tone Building" by American Steel and Wire
 
Ric, 

In spite of what all you've been told, :-) just look at the header! It
says "from" and 
that's the address!

Avery

At 11:30 PM 6/8/05, you wrote:
Issac, 
          Sorry to send this to the whole list but I still can't figure
out how to email a list member individually. I suppose we should all put
our email addresses after our signatures.  Anyhow I would like to see
your book  in KC and am interested in buying it if you want to sell.
Please email me below.  
 
          Richard Moody    ric@pnotec.com
 
-----Original Message-----
From: pianotech-bounces@ptg.org [ <mailto:pianotech-bounces@ptg.org>
mailto:pianotech-bounces@ptg.org] On Behalf Of Isaac Sadigursky
Sent: Saturday, June 04, 2005 1:57 AM
To: 'Pianotech'
Subject: RE: WTB Book, "Tone Building" by American Steel and Wire 
 
I have it.. I can bring it to K.C.  Isaac
 
  _____  

From: pianotech-bounces@ptg.org [ mailto:pianotech-bounces@ptg.org
<mailto:pianotech-bounces@ptg.org> ] On Behalf Of Richard Moody
Sent: Friday, June 03, 2005 11:27 PM
To: 'Pianotech'
Subject: WTB Book, "Tone Building" by American Steel and Wire 
 
I                   Want To Buy  a piano technology book called
something  like "Tone Building. Proceeds of Chicago Piano Manufactures,
1909"
 
 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8d/ef/ca/79/attachment.htm

---------------------- multipart/alternative attachment--