This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Jurgen asked: "I have had a few requests to supply pre cut buckskin for = old style=20 Steinway backchecks. One tech gave me the dimensions as 10.5 x 57 mm=20 (.413 x 2.244"). Can anyone out there confirm this? Dale, Dave, Ron,=20 et al? I want to make sure the dimensions are correct before I get the=20 leather cut. Also, is it a medium thickness or more on the thick side? I can get 2.0 = and 2.5 mm (nominal) buckskin. Thanks in advance" Jurgen, Have one on the bench right now. Since I'm not replacing the leather, at = this time, I didn't remove one to get the length. However, the thickness = is approx. 2.25mm and the width is a "hair" over 11mm. Hope this helps. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9e/9e/fd/67/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC