Recycled upright

[David Love]

This is a multi-part message in MIME format.

---------------------- multipart/related attachment

------=_NextPart_001_0019_01C557DB.445E1D00
That should be "planing" not planning, though the influence of grain on
planing does influence my planning.  Is it Friday yet?
 
David Love
davidlovepianos@comcast.net 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of David Love
Sent: Friday, May 13, 2005 4:35 PM
To: 'Pianotech'
Subject: RE: Recycled upright
 
That's interesting.  While I haven't found much difference in grain
orientation with respect to notching, I have found a difference in
planning.  I usually run a hand plane in both directions to determine
whether or not I am cutting into a rising grain or falling one.  The
falling grain will cut smoother.  Since I tend to plane bridges from
bass end to treble end, getting the grain running the right way
definitely makes a difference when I am planning the bridge to the final
height.  As far a notching goes, I haven't noticed much difference.  
 
David Love
davidlovepianos@comcast.net 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Erwinspiano@aol.com
Sent: Friday, May 13, 2005 2:49 PM
To: pianotech@ptg.org; mfarrel2@tampabay.rr.com
Subject: Recycled upright
 
 
 
   Terry
  In this picture I've done sample chiseling to determine which way
grain orientation aids notch chiseling. Obviously I would be notching
toward the treble  arrow & with the bass arrow. The splinters are from
notching the wrong direction against the grain.
  Dale
 


------=_NextPart_001_0019_01C557DB.445E1D00
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f9/04/3f/eb/attachment.htm

------=_NextPart_001_0019_01C557DB.445E1D00--

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 73069 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/b9/57/e4/30/attachment.jpe

---------------------- multipart/related attachment--