Hi Bruce, There is no need to lower the entire piano. Only loosen and remove the bass bridge strings. As you remove them, keep them in order by puting them on a wire so that they do not get tangled. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: <justpianos@our.net.au> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, May 17, 2005 2:45 AM Subject: Need help. (was Sanding Bridge Tops) > List, I need your help. > Today I tuned a Young Chang U-121 upright piano, purchased 20-25 years ago. > I found the bass very out of tune, uneven. > Customer tells me her previous tuner had problem with bass, but couldn't > explain why. > Piano was twice in storage for considerable time, and 2 years ago moved close > to me, from about 1200 km. away, interstate. > I closely examined piano, and in trying to tighten bridge screws from the > back I found them to be stripped. I then explained to the customer that I > thought this to be the problem and would work out a quote for my next visit. > Customer has just emailed to say bass out already. > Can anybody confirm or deny my suspicions here, and advise on a fix for me to > quote. > My thought: Loosen bass strings off bridge (do need to loosen all strings to > prevent plate cracking), replace bass bridge screws with larger size, try > injecting glue behind bridge, then replace strings, chip-up, and tune. > What say you? > Bruce Browning - The Piano Tuner. > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC