Hey Avery, Oh, Bill talks about it in the instructions--has to do with the thickness of the jig and timing of the damper lift, etc. I'd run downstairs and get the instructions, but I'm recovering from a little out-patient procedure I had this morning, and well.........I don't feel like it. :-) (But I'll be fine, thank you.) Later! Barbara ----- Original Message ----- From: "Avery Todd" <avery1@houston.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, May 17, 2005 5:53 AM Subject: Re: Crushed damper stop rail > Barbara, > > Just curious. I don't understand exactly what you mean by "timing theory". > > Avery > >>This was the first time I used Bill Spurlock's jig for damper regulation. >>The *timing theory* of it didn't work, but once I set my samples it sure >>was >>nice. >> >>Barbara Richmond > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC