It's a machine screw and you'll have to remove the other one and go to a hardware store and match it. Or, you can suggest the customer do it and save themselves the one hour plus of your labor. David Love davidlovepianos@comcast.net -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Arlie Rauch Sent: Tuesday, May 17, 2005 8:35 PM To: pianotech@ptg.org Subject: Fallboard screw A customer has a Fischer grand which had a little screw at each end of the fallboard. These screws must be removed in order to remove the fall board. One of the screws is missing, and I don't see any like it in the Schaff catalog. Any suggestions? Thanks. Arlie Rauch Glendive, MT _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC