This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment ------=_NextPart_84815C5ABAF209EF376268C8 This is made from pinblock scraps, but can be any material. size is: 1.25" x 3.0"x.375". To make 2, start with .750" thick stock. Drill a 7/32" hole @ 1/3 of the length, on center. Slice apart with bandsaw. Shape bottom with an 8degree, on center, bevel. Soften all of the edges. Sand to 600grit smoothness. Have fun.<G> Enjoy. Regards, Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I ------=_NextPart_84815C5ABAF209EF376268C8 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8e/8f/47/74/attachment.htm ------=_NextPart_84815C5ABAF209EF376268C8-- ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: Hammer Surfacing Block.jpg Type: image/jpeg Size: 92298 bytes Desc: Hammer Surfacing Block.jpg Url : https://www.moypiano.com/ptg/pianotech.php/attachments/f9/56/1d/c1/HammerSurfacingBlock.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC