Accu-just System

[John Ross]

For those with no bubble gauge, would it be possible to use one of those 3 
legged things, from a supply house, and a feeler gauge.
If so, is there a conversion table, so many thousandths equals a degree?
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message ----- 
From: "Ron Nossaman" <rnossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Saturday, October 22, 2005 12:43 AM
Subject: Re: Accu-just System


>
>> I have a few Questions about the Baldwin with the Accu-just System. I 
>> would like to know if there is a special tool for setting downbearing on 
>> Accu-just hitch pin? When adjusting do you have to release tension of the 
>> string?
>>  Jack Houweling
>
> Hi Jack.
> Time out ----- orient.
>
> There is no special tool, other than a bubble gage to directly measure the 
> bearing angle. It is not necessary or desirable to lower string tension 
> for the adjustment.
>
> Now, what are you planning on adjusting, within what circumstances, and 
> why?
>
> Ron N
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>