Hey Joe, Thanks for the effort. It is an "E". Pretty much a bright white color. Thanks again, and anxiously awaiting............. BTW, how does a slab differ from a sheet? Respectfully, William R. Monroe ----- Original Message ----- From: "Joe And Penny Goss" <imatunr@srvinet.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, September 02, 2005 8:02 PM Subject: Re: Thick Keytops > No Blanks but could cut you off a slab or see if one of the used tops could > do you. > Can not tell until I go to the shop at the store. > And the note is? > Joe Goss RPT > Mother Goose Tools > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "William R. Monroe" <pianotech@a440piano.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: Friday, September 02, 2005 6:44 PM > Subject: Thick Keytops > > > > hello all, > > > > Anyone have a source for thick pyraline blanks or even molded keytops? > I've > > got one that needs to be replaced and the rest of the set is .090. If > they > > weren't in great shape, I'd replace em all, but just thought I'd see if > > anyone has ideas. > > > > Respectfully, > > William R. Monroe > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > >
This PTG archive page provided courtesy of Moy Piano Service, LLC