Thick Keytops

[Joe And Penny Goss]

Yes, the overhang would be kind of unsightly <G>
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "William R. Monroe" <pianotech@a440piano.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Friday, September 02, 2005 9:29 PM
Subject: Re: Thick Keytops


> Hi Joe,
>
> For one, aesthetics.  There would be a noticeable difference looking at a
> keytop that is say .075 or .060 stuck in between a bunch of .090 keytops.
> Functionally, however, I have no argument.
>
> Respectfully,
> William R. Monroe
>
>
>
> ----- Original Message ----- 
> From: "Joe And Penny Goss" <imatunr@srvinet.com>
> To: "Pianotech" <pianotech@ptg.org>
> Sent: Friday, September 02, 2005 8:21 PM
> Subject: Re: Thick Keytops
>
>
> > Hi,
> > Just a thought. Why could one not cover with any thickness as long as
both
> > the end of the key stick and balance rail pivot point were also built up
> > accordingly. Thus keeping the capstan in the same position?
> > Joe Goss RPT
> > Mother Goose Tools
> > imatunr@srvinet.com
> > www.mothergoosetools.com
> > ----- Original Message ----- 
> > From: "William R. Monroe" <pianotech@a440piano.net>
> > To: "Pianotech" <pianotech@ptg.org>
> > Sent: Friday, September 02, 2005 6:44 PM
> > Subject: Thick Keytops
> >
> >
> > > hello all,
> > >
> > > Anyone have a source for thick pyraline blanks or even molded keytops?
> > I've
> > > got one that needs to be replaced and the rest of the set is .090.  If
> > they
> > > weren't in great shape, I'd replace em all, but just thought I'd see
if
> > > anyone has ideas.
> > >
> > > Respectfully,
> > > William R. Monroe
> > >
> > >
> > > _______________________________________________
> > > pianotech list info: https://www.moypiano.com/resources/#archives
> >
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
> >
> >
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives