Thick Keytops

[Joe And Penny Goss]

Hello Mike,
As has been pointed out, there will be a .015 difference showing at the
overhang of the key top. Out there for all to see. For 90% of my clients
with the old beaters this would not matter much.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Mike Kurta" <mkurta@adelphia.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Saturday, September 03, 2005 8:28 AM
Subject: Re: Thick Keytops


>     Bill:
>     How about glueing thin veneer to the top of the key, then attach a
> conventional .075 keytop.  If the color is the same, you won't see any
> difference.  I've done this when I milled too much off a key and needed to
> build it up.  It works!
>     Mike Kurta
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives