This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David Nereson said: "Also infamous are the=20 double flanges made to supposedly fit old Steinway uprights. They=20 don't. The birdseyes are too wide for the ears of the flange, which=20 have to be filed down. (If the birdseye is filed down, it increases=20 friction if the butt rubs against the inside of the flange) --Dave, Don't file it, sand it. I use 320 on sandpaper file, (Joe Garrett = Special Order- - available to all. end of commercial.<G>) Once you've sanded to fit the flange, use a fine countersink to put a = "dent" in each side of the birdseye. This makes the pinning alignment = easier. Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b8/83/59/0b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC