You didn't by any chance vacuum up all those felt punchings...;-] I'd think they need to be there or you'd have a extra noisy action. Normal dip? Keys level? Keys a little low under the music rack? Some space? Try one key. You'll have to lower the capstan and add a front punching. If it works Ok....dampers are not lifting early, you could add one thin felt balance rail punching all the way across and do the regulation.... David I. ----- Original message ---------------------------------------- From: John Delmore <johndelmore@cox.net> To: <pianotech@ptg.org> Received: Sat, 3 Sep 2005 23:12:43 -0400 Subject: Balance rail punchings >Hi all: >Today, I got into the Brinkerhoff "lab" piano--just a thourough cleaning right now. I >noticed that there are no felt punching on the balance rail: is this common for circa >1925 pianos (sn 114743 if any of you kind folks have an atlas handy)? I'm guessing I >shouldn't "add" felts where I don't find them. >John Delmore >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC