Burned out many of drills until I wised up and treated myself to Milwaukee. It's still kicking strong after 12 yrs of hard use. Tom Servinsky ----- Original Message ----- From: "pianolover 88" <pianolover88@hotmail.com> To: <PIANOTECH@PTG.ORG> Sent: Sunday, September 04, 2005 4:58 PM Subject: drill for pin removal > Just bought a new "Milwaukee Magnum" 1/2" reversible drill for tuning pin > removal, mainly. It's quite outstanding with 8 amps of power, vs the > typical 5-6 range. Keyed chuck and 0-850 rpm. Price: About $140.00. Model > is: 0299-20. This is a lifetime quality industrial strength drill that > replaces my not-so-old "Chicago" brand POS fromHarbor Freight Tools. That > one much burned up after less than 1/3 of the way through the last upright > pin removal. So the Milwaukee gets my 4 star rating! > > Terry Peterson > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC