hex socket bolts

[Delwin D Fandrich]

| -----Original Message-----
| From: pianotech-bounces@ptg.org 
| [mailto:pianotech-bounces@ptg.org] On Behalf Of Ron Nossaman
| Sent: September 07, 2005 8:26 AM
| To: Pianotech
| Subject: Re: hex socket bolts
| 
| 
| > The tests I referred to did not consider machine screws 
| that were pressed in.
| > They were standard machine screws that were screwed in -- 
| just without 
| > the benefit of advance threading.
| > 
| > Del
| 
| 
| Got it, but David mentioned pressing in capstans, and you had 
| earlier said that pressing in capstans gave a better fit than 
| screwing them in (pre-threaded or not), so I was trying to 
| cover all the bases.
| 
| Ron N
| _______________________________________________


That's not possible. Just be thankful if you can take a swipe at them from time
to time.

Del