This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi David, If that is a tip left over from American Supply< it most = likely is not what it is marked. Schaff sold some of those until several of us told them about the = problem. We were ignored until Randy Potter showed them. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: David Ilvedson=20 To: pianotech@ptg.org=20 Sent: Sunday, September 11, 2005 5:48 PM Subject: Re: gots de shapt! I've got the same problem with my new Faust hammer. The Hale #2 tip = doesn't fit like other #2s on the tuning pin well....I'm going to try a = watanabe David I. -------------------------------------------------------------------------= ----- Original message From: "Joe Garrett"=20 To: pianotech=20 Received: 9/11/2005 4:25:15 PM Subject: Re: gots de shapt! Horace said: "Also, any chance for short=20 15-degree heads and/or tips?"=20 Joe, How about tips that will FIT the Hale Hammer?!!! Also, Heads, ditto as = above. The last "Hale" tips and heads I got from "Shaft" didn't fit = worth a crap! :-( How's the new toy "rethink" progressing?<G> Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e7/c7/90/2c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC