Accurate cutting strips of cloth for Damper backing

[Robin Stevens]

---------------------- multipart/alternative attachment
 Michael. I'm surprised you do not have a felt guillotine for cutting
parallel strips of felt etc.=0D
There is a picture on this page, but there are far better guillotines
available.=0D
=0D
http://www.vandaking.com/us-shop/index.html?loadfile=3Dcatalog29_1.html=0D
=0D
Regards=0D
 Robin Stevens=0D
=0D
=0D
-------Original Message-------=0D
 =0D
From: Pianotech=0D
Date: 09/18/05 17:25:30=0D
To: Pianotech=0D
Subject: Re: Accurate cutting strips of cloth for Damper backing=0D
 =0D
Hi Michael,=0D
Would a coating of that rubber cement for paper, work.=0D
When dry, the higher friction should help.=0D
When finished, it could be removed, by pealing, or solvent.=0D
John M. Ross=0D
Windsor, Nova Scotia, Canada=0D
jrpiano@win.eastlink.ca=0D
----- Original Message -----=0D
From: "Michael Gamble" <michael@gambles.fsnet.co.uk>=0D
To: <pianotech@ptg.org>=0D
Sent: Sunday, September 18, 2005 4:37 AM=0D
Subject: Re: Accurate cutting strips of cloth for Damper backing=0D
 =0D
 =0D
> Hello List=0D
> Anyone got any bright ideas on how to cut cloth (or felt) in really=0D
> parallel=0D
> strips and at a specific width for use on damper backing? The original =
was=0D
> indeed cloth, not felt, the weave is plain to see at the sides. I have =
a=0D
> "roller" type knife, one of those rubbery green mats (a large one) mark=
ed=0D
> out in small squares, and a long straight-edge used for key-levelling. =
The=0D
> problem is to stop the felt from shifting under the knife! (don't we al=
l?)=0D
> Regards=0D
> Michael G.(UK)=0D
>=0D
>=0D
>=0D
> _______________________________________________=0D
> pianotech list info: https://www.moypiano.com/resources/#archives=0D
>=0D
 =0D
_______________________________________________=0D
pianotech list info: https://www.moypiano.com/resources/#archives=0D
=20
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20/94/d9/ee/attachment.htm

---------------------- multipart/alternative attachment--