Accurate cutting of cloth. Knife vs. Rotary

Dean May deanmay@pianorebuilders.com
Mon, 19 Sep 2005 09:06:44 -0500


Great tip, Terry!

Dean
Dean May             cell 812.239.3359
PianoRebuilders.com   812.235.5272
Terre Haute IN  47802


-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Farrell
Sent: Monday, September 19, 2005 8:42 AM
To: Pianotech
Subject: Re: Accurate cutting of cloth. Knife vs. Rotary

IMHO, based on a fair little bit of experience, your statement is true
by a 
factor of at least 7,000,000! I find there is no comparison. I have
three 
sizes of the rotary razors. I also use them for cutting key bushing felt

during installation - works like a charm.

Terry Farrell

----- Original Message ----- 
From: "Michael Gamble"


> Now that's what I call interesting, Alan. I'm putting my reply on the 
> List:
> In "principle" the "rotary" cutter should be kinder than the knife,
there
> being a continuous "guillotine" action rather than a "dragging" action
as 
> in
> the knife. Any comments out there on the List?
> Regards,
> Michael G.(UK) 


_______________________________________________
pianotech list info: https://www.moypiano.com/resources/#archives




This PTG archive page provided courtesy of Moy Piano Service, LLC