Back Catch Leather replacement Clamps!!!

Avery Todd avery1@houston.rr.com
Mon, 19 Sep 2005 18:36:04 -0500


And what does "asparagus" have to do with the previous posts????

Avery

At 06:16 PM 9/19/05, you wrote:
>O.K. I get it. But what does this have to do with
>asparagus ?
>       Thump
>
>--- Joe Garrett <joegarrett@earthlink.net> wrote:
>
> > Thumper said: "That's a lovely photo, Joe, but I
> > don't "get it".
> > First, I guess you mean "catchers", as every upright
> > I've seen only had buckskin on the catchers. The
> > backchecks are hard felt.
> >      Next, I don't understand how these are to be
> > used. Your descriptiion is probabbly fine, but I'm
> > an
> > idjit. Please paraphrase for idjits.
> >      Thanks!"
> >
> >      Thumper,
> > You idjit, use yer two brains cells and put them in
> > the imagine mode! The "catcher is attached by a
> > short piece of hammer shank material. The slot on
> > the clamp goes thar! The front part of clamp has
> > been somewhat "flattened" so that it will hold the
> > leather in the gluing process. Get It? Sheesh!
> > Thumper!
> > O.K.! On to bigger and better thingees!<G>
> > Joe Garrett, R.P.T.
> > Captain, Tool Police
> > Squares R I
>
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives



This PTG archive page provided courtesy of Moy Piano Service, LLC