This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David I. asked: "I going to install bridle straps on a Steinway upright. = No catcher hole for cork so I'm using the plain bridle straps. = Schaff informed me that the tacks are not available anymore. How do = you guys and gals attach the bridle straps to the catcher dowel?" David, With Hot hide glue!<G> As an aid, to this procedure, I made an aluminum = thingee. The "slot is coated with emralon so's the glue don't stick to = it. It's used to push the end of the strap onto the backcatch stem and = flush against the butt/stem area. I'll post the scans in a sec' or two. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fe/1a/14/61/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC