Key Bushing Cauls-sizing wrecked mortices

[Farrell]

Unless you are making the entire end of the key out of epoxy, I doubt it 
would have significant effect.

Terry Farrell

----- Original Message ----- 
From: "gordon stelter"

> Ggod point. But the "upside": would be that there
> would be less swelling/shrinkage from humidity swings.
>     G
>
> --- Joe And Penny Goss <imatunr@srvinet.com> wrote:
>
>> Hi Gordon,
>> My only wonder is if there will be any flexability
>> left for adjusting the
>> tightness of the pin/
>> Joe Goss RPT
>> Mother Goose Tools