---------------------- multipart/alternative attachment Rick, You don't say whether the plate is out of this upright. If in, I favor the drywall screw replaced later with dowel, as previoiusly described. If out, I use the piano wire through the rib/soundboard tightened with a tuning pin in a small block (It's in the Journal reprints, I think). Never tempted to use the schaff clamps. Mike ----- Original Message ----- From: To: pianotech@ptg.org Sent: 9/23/2005 2:24:38 PM Subject: soundboard clamps List, Does anyone use the soundboard clamps sold by Schaff? I need to repair an old upright pulling away from ribs . Thanks, Rick Ucci/Ucci Piano ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/31/c5/dd/f2/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC