Knight balance rail pins

[Michael Gamble]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Yes, Joe, and - more importantly - they seem to have stood the "Test of
Time". The cloth bushing felts are still un-grooved!

Michael G.(UK)

 

  _____  

From: Joe Garrett [mailto:joegarrett@earthlink.net] 
Sent: 26 September 2005 22:31
To: pianotech
Subject: Re: Knight balance rail pins

 

Michael The Archaic said: "Knight K-10 about 30 years old. In this case the
pin was again slightly
smaller in diameter but had a plastic sleeve shrunk onto it. The key
bushings were standard red cloth."

Michael,

The "plastic sleeve" was likely Heat Shrink Teflon Tubing. Very good idea
for all sorts of thingees.<G>

Joe Garrett, R.P.T.
Captain, Tool Police
Squares R I


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/78/47/df/d1/attachment.htm

---------------------- multipart/alternative attachment--