Ric writes: << What advantage would there be (if any) to the flat belly rail in this instance, and is this something I should consider altering at all ? >> Isn't the ledge on the inside of the case, where the rest of the soundboard is attached, also flat? Perhaps Bluthner expected the crown to be equally supported all the way around. I can sorta see the logic in this, since a bellyrail that curved upwards would stress the soundboard in a rather unequal way. Regards, Ed Foote RPT http://www.uk-piano.org/edfoote/index.html www.uk-piano.org/edfoote/well_tempered_piano.html
This PTG archive page provided courtesy of Moy Piano Service, LLC