works for me..original

[Brian Doepke]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi Alan,
=20
The membership of the PTG, and this list, have been very helpful with
answers to my questions that probably seem stupid.  I am very pleased =
that
you could use my little idea.  I also attached some Velcro to each flap
corner to help keep it closed.
=20
Brian P. Doepke
=20
AAA Piano Works, Inc.
260-432-2043
260-417-1298
=20
  _____ =20

From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On =
Behalf
Of Alan Barnard
Sent: Tuesday, January 10, 2006 9:15 AM
To: Pianotech
Subject: RE: works for me..
=20
The idea is brilliant and I am going to use it. I've been putting the =
tools
in handle-first, which risks the occasional stabbing.=20
=20
The numbers ARE the actual size in thousandths of an inch.=20
=20
For example, #48 is .048". Subtract ten from the number and divide by =
two to
match the center pin sizes.=20
=20
So a 48 gives you 48-10=3D38, 38/2=3D19. So the #48 tool is, in theory, =
the same
diameter as a #19 center pin.=20
=20
But if you are using it to ream (actually remove) some felt, start with =
a
smaller size, then burnish with the correct size (smooth part of tool =
only)
or a tapered burnisher to compact the felt and try the pin for fit.
=20
Alan Barnard
Salem, Missouri
=20
=20
----- Original Message -----=20
From: Brian Doepke <mailto:doepkeb@comcast.net> =20
To: Pianotech <mailto:pianotech@ptg.org>=20
Sent: 01/10/2006 7:06:05 AM=20
Subject: works for me..
=20
Just sharing an idea that worked for me last night.
After getting a new set of flange burnishing tools, I found that it was =
kind
of tricky to re-insert them into the cloth case.  The long needles would
catch on the cloth.
I measured and then cut some plastic drinking straws and slid one into =
each
needle pouch.  The pouch =13downbearing=14 holds the straws in place and =
now the
tools slide right in with out the hassle of getting caught on the =
interior
material.
=20
Also, does any one know the actual diameters of these tools?  Right now =
all
I have are the numbers 48, 49, ect. that are printed on the handles.
=20
Brian P. Doepke
=20
AAA Piano Works, Inc.
260-432-2043
260-417-1298
=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/bc/af/a8/3f/attachment.htm

---------------------- multipart/alternative attachment--