Looking for certain tools

[Cy Shuster]

Between the two parallel faces, instead of a curve, there are two, shorter 
angled faces, that fit those angles on the capstan as you push in.  It's 
still open, not a box wrench.

--Cy--

----- Original Message ----- 
From: "David Ilvedson" <ilvey@sbcglobal.net>
To: <pianotech@ptg.org>
Sent: Tuesday, January 10, 2006 11:19 PM
Subject: Re: Looking for certain tools


> I'm not sure how you'd use a four flat faced tool...lift the wippen and 
> slip it over the capstan?...with my U-shaped tool, I just ground down the 
> sides to make it skinnier...no problems...
>
> David Ilvedson, RPT
> Pacifica, California