permanent dolly for U1

[William R. Monroe]

David,

Good info, and yes, I'd think it a little tricky coming down on a dolly with
wheels that extend out the back - what 5", well, 3" anyway at the bottom of
the wheel.  I'd thought of lifting one end, blocking up as high as necessary
to get under it with a right angle drill, repeat other side.

We'll see.  Other suggestions?

Thanks
William R. Monroe



----- Original Message ----- 
From: "David Ilvedson" <ilvey@sbcglobal.net>
To: <pianotech@ptg.org>
Sent: Thursday, January 26, 2006 9:59 PM
Subject: Re: permanent dolly for U1


> One more thing...I haven't use a tipper for dolly installation...seems to
me it would be tricky coming back down...anyone used a tipper for dolly
installation?
>
> David Ilvedson, RPT
> Pacifica, California
>
>
>
> ----- Original message ----------------------------------------
> From: "William R. Monroe" <pianotech@a440piano.net>
> To: "Pianotech List" <pianotech@ptg.org>
> Received: 1/26/2006 7:39:57 PM
> Subject: Re: permanent dolly for U1
>
>
> >Thanks Dave, Joel.  Kind of what I guessed.  Ever have any problem with a
> >piano fitting onto one of these trucks?
>
> >Regards,
> >William R. Monroe
>
>
> >----- Original Message ----- 
> >From: "David Ilvedson" <ilvey@sbcglobal.net>
> >To: <pianotech@ptg.org>
> >Sent: Wednesday, January 25, 2006 2:29 PM
> >Subject: RE: permanent dolly for U1
>
>
> >> Paul Jansen...heavy duty upright dolly...big wheels...easy to
move...tip
> >piano on its side and install...
> >>
> >> David Ilvedson, RPT
> >> Pacifica, California
> >>
> >>
> >>
> >> ----- Original message ----------------------------------------
> >> From: "William R. Monroe" <pianotech@a440piano.net>
> >> To: Pianotech <pianotech@ptg.org>
> >> Received: 1/25/2006 12:17:24 PM
> >> Subject: permanent dolly for U1
> >>
> >>
> >> >Hi all,
> >>
> >> >I'm going to be putting a heavy duty dolly on a Yamaha U1.  Any
> >preferences
> >> >out there?  Perhaps more important, does anyone know the depth of the
> >base
> >> >of a U1, front to back, so I know for sure it will fit?
> >>
> >> >Many Thanks,
> >> >William R. Monroe
> >>
> >>
> >>
> >> >_______________________________________________
> >> >Pianotech list info: https://www.moypiano.com/resources/#archives
> >> _______________________________________________
> >> Pianotech list info: https://www.moypiano.com/resources/#archives
> >>
> >>
>
>
> >_______________________________________________
> >Pianotech list info: https://www.moypiano.com/resources/#archives
> _______________________________________________
> Pianotech list info: https://www.moypiano.com/resources/#archives
>
>