---------------------- multipart/alternative attachment >Too tight a fit that way - just won't go. > From looking at the photos it seems to me that the rod would be better > placed at the bottom of the flange molding. That way the rod would be bound > between the screw and molding keeping it tight to the bottom >profile of the rail. I would ease the bottom portion of the flange to make it fit. My concern is that the flange will ride up the rail; that is, unless the shoulder of the screw is securing the flange to the bottom of the rail. I still might not trust it. -- Regards, Jon Page ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/43/8a/7a/26/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC