Pinblock dilemma for a first timer.

[Michael Spreeman]

You may also want to consider contacting Andre Bulduc to have him make a 
1.75" thick block for you.  By the time you locate, purchase, mill, and 
laminate additional panels onto a new block, this may well be a less 
expensive alternative.

Michael Spreeman
www.spreemanpianoinnovations.com


>From: Hotwheelsp at aol.com
>Reply-To: Pianotech List <pianotech at ptg.org>
>To: pianotech at ptg.org
>Subject: Pinblock dilemma for a first timer.
>Date: Thu, 1 Jun 2006 23:39:47 EDT
>
>
>I have begun rebuilding my first piano. It is an upright player. Upon
>removing the plate from the piano, the pinblock and soundboard fell out. 
>(Almost
>all the glue joints on the piano have come loose, so this is not that
>surprising) Anyway, the old pinblock measures 1 3/4 inch thick. After going 
>  through
>the supply house catalogs (Schaff and Pianotek)  the thickest new pinblock
>obtainable was 1 1/2 inch. What should  I do to obtain the original 
>thickness? Any
>suggestions would be greatly  appreciated as I lack experience in this 
>regard.
>
>Phillip Pardue
>_Hotwheelsp at aol.com_ (mailto:Hotwheelsp at aol.com)
>
>P.S. What glue is recommended for regluing the upright frame? I was  
>thinking
>epoxy.
>
>
>