wire size

[piannaman at aol.com]

Thanks, Avery...another mystery of the universe solved!
 
-----Original Message-----
From: Avery <avery1 at houston.rr.com>
To: pianotech at ptg.org
Sent: Sat, 3 Jun 2006 09:46:21 -0500
Subject: Re: wire size


Dave, 
 
*how DOES one get the division symbol on a computer keyboard??> 
 
Hold down the ALT key & press 0247 (the numbers on the R. not across the top) 
and you'll get ÷. 
 
There are several alt code charts out there. Google it or here are links to a 
couple. 
 
http://www.coloryourprofyle.com/phade/alt.html 
 
http://www.tedmontgomery.com/tutorial/ALTchrc.html 
 
Avery 
 
>Michelle, 
 
A good way to remember without a chart: 
 
Subtract 5 from the thickness, then divide by two, and voila! The wire size 
 
(41-5+36, 36 divided* by 2 = 18) 
 
Dave Stahl 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060603/5a2f99d8/attachment.html