Ron Thanks Pal Dale According to what I have here, Metric is (approximately, rounded to four decimal places) 0.0005" smaller through gages 12-14.5, 0.0006" smaller through gages 15-18, 0.0007" smaller through gages 18.5-21, and 0.0008" smaller through gages 21.5-23. It never does get a full half size smaller. gage inches inches metric ------------------------------ 12 0.029 0.0285 0.725 12.5 0.030 0.0295 0.75 13 0.031 0.0305 0.775 13.5 0.032 0.0315 0.8 14 0.033 0.0325 0.825 14.5 0.034 0.0335 0.85 15 0.035 0.0344 0.875 15.5 0.036 0.0354 0.9 16 0.037 0.0364 0.925 16.5 0.038 0.0374 0.95 17 0.039 0.0384 0.975 17.5 0.040 0.0394 1 18 0.041 0.0404 1.025 18.5 0.042 0.0413 1.05 19 0.043 0.0423 1.075 19.5 0.044 0.0433 1.1 20 0.045 0.0443 1.125 20.5 0.046 0.0453 1.15 21 0.047 0.0463 1.175 21.5 0.048 0.0472 1.2 22 0.049 0.0482 1.225 23 0.051 0.0512 1.3 23.5 0.052 0.0522 1.325 Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060606/64ed8366/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC