Weather changes in a matter of hours. At 01:22 PM 6/9/2006, you wrote: >One of the problems I have been trying to solve is how to improve my >unisons so that they stay in tune longer and don't go out shortly >after I have tuned the piano. I apply firm test blows to equalize >the tension along the string, but find that the some of the unisons >in the treble still go out of tune within a few days or weeks >afterwards. I think the problem is due to not setting the pin >properly. The question I have is, during unison tuning, and when you >are tuning each outer string to the center string, do you turn the >tuning lever to raise the pitch to the high side of the center >string, to the point that you hear a "tinny sound" when the two >frequencies are different, and then turn the tuning lever to bring >the pitch back down so that it sounds pure? I read somewhere that >the amount the strings should be raised before bringing it down is >to the point that you can hear a beat of a few Hz, but raising the >pitch to the point where you hear a tinny sound is more than a few >Hz. Thank you for your advice. > >Robert Finley -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060609/c0e5b1bb/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC