?? Ron, did you mean 2.5 ?? Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: alan forsyth To: Pianotech Sent: Saturday, March 04, 2006 3:53 PM Subject: Re: v-bar/capo repair: Seiler pictures 2 Hi Ron, That is a nifty little wedge. How do you attach the line to the ends of the board; looks as though you've wedged that as well? Curiosity never killed this cat! Regards AF ----- Original Message ----- From: "Ron Nossaman" <rnossaman at cox.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Saturday, March 04, 2006 7:22 PM Subject: Re: v-bar/capo repair: Seiler pictures 2 The attached photo of the piano > currently in progress shows nearly 3mm of residual crown in > the killer octave. The strings are on, up to pitch, and > bearing there is around 1.5°. The fun part is that the shop, > for the last three weeks, has been dry enough that my MC gage > shows just shy of the reading at which I ribbed the panel > (6%). That's all rib support! I just love this stuff. > > ------------------------------------------------------------------------------ _______________________________________________ Pianotech list info: https://www.moypiano.com/resources/#archives -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060304/d3aea765/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC