FArrand-Cecilian Player

pianotune05 at comcast.net pianotune05 at comcast.net
Tue Mar 21 10:41:42 MST 2006


I'm about 5'8" 178lbs. 42R sport coat I think 34 waist.  If I lose weight and get to 115lbs, then I can work on player actions too. :) I'm not sure how to lose the height, maybe let my hair recede more.
Marshall

-------------- Original message -------------- 
From: <pianolady50 at peoplepc.com> 

Okay, all of you really don't wannabe player techs!  I'm running like crazy today.  I'll post later tonight about removal of old player actions for service of the piano.  Been there done that loads.  BTW, I'm about 5'3" and 115lbs.  If I can do it - you can!

Debbie
----- Original Message ----- 
From: David Ilvedson 
To: pianotech at ptg.org 
Sent: Tuesday, March 21, 2006 10:47 AM
Subject: Re: FArrand-Cecilian Player



he, he, he...

David Ilvedson, RPT
Pacifica, California






Original message
From: "Joe And Penny Goss" 
To: "Pianotech List" 
Received: 3/21/2006 7:32:53 AM
Subject: Re: FArrand-Cecilian Player


Rent-an-elf?
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: piannaman at aol.com 
To: pianotech at ptg.org 
Sent: Tuesday, March 21, 2006 7:49 AM
Subject: FArrand-Cecilian Player


The mother of one of my son's classmates called awhile back and said she has a player piano with one key not working that also needs tuning.  Not making any promises, I told her I'd go check it out.

I went out yesterday and looked at the piano.  It's a Farrand-Cecilian player from 1910 or so, a massive fortress of a piano.  The cause of the malfunctioning note is a broken brass flange, the access to which is extremely well guarded by a player mechanism the like of which I've never seen.  

I understand that these are reproducing players.  It is quite a nice piano, other than lots of action wear and neglect.  

So how does one get to the action?  I was trying to find a way to get inside to replace the tongue of the flange that broke off, but it looks like a job of at least two people and several hours just to be able to get access to the piano mechanism.

I directed the lady to a player specialist.  Afterward I did some searching on the web and found affirmation that these pianos were solidly built and difficult to work on.  

Any of you player specialists have tips for gaining access to the inner sanctum of this piano?

Thanks,

Dave 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060321/c353ff9c/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC