I hold 4 or 5 keys down and lift and drop the hammers adjusting as needed. Then moving along to the next 4 or 5 hammers.... Samples set with finger on hammer and rocking key to make sure hammer tail doesn't rub backcheck... David Ilvedson, RPT Pacifica, California Original message From: "Matthew Todd" To: "Pianotech List" Received: 3/22/2006 11:30:03 PM Subject: Checking What is the best, most accurate way to regulate checking? I was doing a lot of practice last night, and it seems that when you strike the key with even the slightest amount of variance, it changes the checking distance of the hammer. Also, can someone send me the link to the Piano Tech searchable archives? I cannot find it on the PTG site. Thanks! Matthew New Yahoo! Messenger with Voice. Call regular phones from your PC for low, low rates. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060323/973ceaac/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC