Thank you! ----- Original Message ----- From: "Michael Spreeman" <m_spreeman at hotmail.com> To: <pianotech at ptg.org> Sent: Thursday, May 18, 2006 10:10 AM Subject: RE: compressed air hard pipe > 3/4" copper is the way to go. > > Michael Spreeman > www.spreemanpianoinnovations.com > > > > >From: "Fenton Murray" <fmurray at cruzio.com> > >Reply-To: Pianotech List <pianotech at ptg.org> > >To: <pianotech at ptg.org> > >Subject: compressed air hard pipe > >Date: Wed, 17 May 2006 21:07:18 -0700 > > > >I've seen this discussed before but would enjoy knowledge shared on this > >subject. I'm finally going to put my compressor outside (along with a dust > >collector) and hard pipe it into the shop. 150lb is the max pressure. I've > >heard not to use pvc. Thanks in advance to all for responses on this > >subject of what kind and size of pipe to use. > >Fenton Murray, RPT > >www.MurraysPianoTuning.com > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC