[Files] 2 pictures for you

[William Benjamin]

There is always more than one way to remove an Acrosonic action.   I put a
upright damper block on the end stickers, on the pin at the top and a bungy
cord around the middle of the stickers.   Am I the only one who does this?

 

William

 

 

 

 

PIANO BOUTIQUE

William Benjamin

Piano Tuner Extraordinaire

 <http://www.pianoboutique.biz> www.pianoboutique.biz

The tuner alone,

preserves the tone.

 

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jon Page
Sent: Sunday, May 21, 2006 8:42 AM
To: pianotech at ptg.org
Subject: [Files] 2 pictures for you

 

>Some time ago we had a thread concerning  tips for acrosonic action
removal.

>Several methods for securing the guide rail to the pickup fingers were
noted,

>including my suggestion of using electricians cable ties.  Well forget what
I said,

>I like Jon Pages method of using rubber mutes much better.

 

Thanks Tom, but I can't take credit for that. Credit goes to the Guild as a
whole for the

open and unfettered exchange of ideas.  I gleaned that technique from a
distant past

seminar during the Steve Gellen era. It was either him, Wally or Chris.

-- 


Regards,

Jon Page

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060522/6f57d0ae/attachment.html