Are there perchance additional screws hidden beneath rubber buttons on the keyblocks? --Paul Mulik ----- Original Message ----- From: "Richard Day" <pianotoone at hotmail.com> To: <pianotech at ptg.org> Sent: Wednesday, May 24, 2006 10:52 AM Subject: Action removal > A Grinnel baby grand. I need to remove the action. After removing the key > slip I found the only screws on the bottom of the keybed were those to hold > on the legs. On the cheek blocks on either end of the keyboard is a screw > that goes from the front on about a 45 degree angle into the keybed. (See > crude diagram attached). > > I removed those screws and although the cheek blocks move and are somewhat > loose they will not come out. Also the fall board doesn't seem to be > attached to the cheek blocks and it doesn't appear that it will come out > even if I did get the cheek blocks out. > > This is first time in 20 years I haven't been able to remove an action. > > > HELP PLEASE > > Dick Day > Marshall > > ---------------------------------------------------------------------------- ---- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 5/22/06
This PTG archive page provided courtesy of Moy Piano Service, LLC