Joe, I believe you were going to try to be nicer? David Ilvedson, RPT Pacifica, California Original message From: "Joseph Garrett" To: pianotech at ptg.org Received: 5/26/2006 9:15:00 PM Subject: Re: Clicking Drop Screws Andrew said: "Fired off too early in the morning. Yes drop screws are on the hammer flange and pulling that action rail would allow you to glue with ease without fear of leaks. Seems those screws should be tough enough to take CA." Good luck, Andrew, Brilliant! ;-( Now, please tell me how you propose to go about: "..pulling that action rail....", Seeing as it's a STEINWAY?!!! GRAND!!!! Unless you intend to desolder the rail from the action frame, I truly doubt it!! Sheesh! OR, am I missing something here? Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060526/f3ebbdb8/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC