Naw Joe, I missed something. I've been working on a different action that would accommodate that. Just now came back from work on an old D. De-soldering and re-soldering is more work than thoroughly protecting the whippens. :-[ Andrew At 11:15 PM 5/26/2006, you wrote: >Andrew said: "Fired off too early in the morning. Yes drop >screws are on the hammer flange and pulling that >action rail would allow you to glue with ease >without fear of leaks. Seems those screws should be tough enough to take CA." > >Good luck, > >Andrew, >Brilliant! ;-( Now, please tell me how you propose to go about: >"..pulling that action rail....", Seeing as it's a STEINWAY?!!! >GRAND!!!! Unless you intend to desolder the rail from the action >frame, I truly doubt it!! Sheesh! OR, am I missing something here? > > >Joe Garrett, R.P.T. (Oregon) >Captain, Tool Police >Squares R I > >
This PTG archive page provided courtesy of Moy Piano Service, LLC